Introduction
Linear Integrated Systems headphone amplifier evaluation board includes the following features: Stereo, single‐ended input and single‐ended output 400 mW output power into 100Ω Wide frequency response (10Hz‐200kHz; ‐1dB) Voltage gain 5 (14dB) Low distortion (THD+N is less than 1% at 10Hz‐20kHz at 5Vrms into 100Ω and less than 0.1% from 10 Hz to 20 kHz at 1Vrms into 100Ω load) Short‐circuit protection Pop reduction (slow start) circuit Defeatable cross‐feed circuit Volume control Overvoltage and reverse polarity power protection Audio input and output connections: left and right RCA phono jack inputs, ¼” stereo phone jack output External 9V–16V supply input External power supply connector: power jack, inside diameter 2.1mm, outside diameter 5.5mm